SKU: 32923035247

ImageWorks Panoura 18S Dental Panoramic X-Ray

$23189.17 $25765.74
Save 10%
No.2 Bestseller on pluriversity.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 14 - Jul 19

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

ImageWorks Panoura 18S Dental Panoramic X-Ray9992433000 Panoura 18S Pan (with Acq PC) 9992433100 Panoura 18S Pan With Ceph (with Acq PC) 2 Year Limited Warranty including Remote Technical Support EASY 3D UPGRADE Our basic 2D panoramic unit is upgradeable to 3D, so there is peace of mind that the initial investment is protected if 3D capability is needed later on. The Panoura 18S is the most practical advanced 2D dental imaging system. Ideal for doctors who need ultra high resolution Panoramic

9992433000 Panoura 18S Pan (with Acq PC)

9992433100 Panoura 18S Pan With Ceph  (with Acq PC)

 2 Year Limited Warranty including Remote Technical Support

EASY 3D UPGRADE

Our basic 2D panoramic unit is upgradeable to 3D, so there is peace of mind that the initial investment is protected if 3D capability is needed later on.

 

The Panoura 18S is the most practical advanced 2D dental imaging system. Ideal for doctors who need ultra-high-resolution Panoramic and Ceph capabilities all in one compact, low-cost platform.

DIRECT CONVERSION SENSOR

Most Panoramic CMOS sensors use lower cost, more generally available materials that are less sensitive to x-ray. Therefore, these sensors must convert x-ray to light before converting to a digital signal. This can result in image blurriness because the extra conversion step can cause the radiation to “fan out” and inadvertently trigger surrounding pixels. The Panoura has a unique sensor design that converts x-ray directly to digital, which contributes to a much sharper image.

16 BIT SENSOR

How do we create the gorgeous images we’re so well-know for? It’s the 16 bit sensor. A 16 bit sensor has twice as many greyshades that can be presented in each pixel as a 15 bit sensor and four times as many as a 14 bit sensor. In the end, a 16 bit sensor provides fantastic texture and contrast.

FMX CLIPPINGS & BITEWINGS

Not only do we do create bitewings, but our FMX Clipping feature creates 18 intraoral-sized images clipped from the pan with one click. Instead of taking 18 individual images with an intraoral X-Ray, they can all be generated at once in 14 seconds.

EXQUISITE IMAGES – EVEN WITH SUBOPTIMAL POSITIONING

Panoura 18S features auto-correction for suboptimal patient positioning. Without this, an already suboptimal image (from a pan with a lower-quality sensor) can be further degraded if the patient is not positioned optimally. With the Panoura, the very high data-capture sensor acquires many “layers” of image data. This allows the powerful software to auto-correct for suboptimal patient positioning. It’s worth noting that all of this data is available after the image is taken – so the image can be further optimized if desired. In the end, this assures exquisite images with the Panoura every time while being less dependent on operator training or the ability of the patient to remain stationary.

Technical Specifications:

  • Sensor: Cadmium Telluride direct CMOS
  • Levels of Gray: 16-bit (65,536 or 64K)
  • Exposure Times (Sec): 8, 14, 16 (Panoramic Adult)
  • 6, 11, 13 (Panoramic Child)
  • 4 x 2 (TMJ) 8, 10 (Cephalometric)
  • 11.5 (3D Dent Mode)
  • 11.5 x 2 (3D Oral Mode)
  • Magnification: 1.2 - 1.29 (Panoramic, TMJ)
  • Pixel/Voxel Size: 100 µm square pixel (2D Modes)
  • 80 µm cubic voxel (3D Dent Mode)
  • 100 µm cubic voxel (3D Oral Mode)
  • 3D F.O.V.:
  • 4cm x 5.7cm (3D Dent Mode)
  • 7.7cm x 5.4 cm (3D Oral Mode)
  • Focal Spot: 0.5mm x 0.5mm
  • Tube Voltage: 58 - 82 kVp
  • Tube Current: 2 - 10 mA
  • Power Supply: 120 VAC +/- 10% (20A)
  • Input: 2 kVa
  • Total Filtration: 2.5mm Aluminum
  • Software Apps: EVAsoft (Pan/Ceph)
  • OnDemand3D (3D Modes)
  • Weight: (Pan wall mounted) 287 lbs
  • (Pan/3D wall mounted) 309 lbs
  • (Pan/Ceph wall mounted) 375 lbs
  • (Pan/Ceph/3D wall mounted) 397 lbs
  • (Pan floor stand) 342 lbs
  • (Pan/3D floor stand) 364 lbs
  • (Pan/Ceph floor stand) 430 lbs
  • (Pan/Ceph/3D floor stand) 452 lbs

 

Computer Requirements for ImageWorks’ Panoura 18S

Note: ImageWorks strongly recommends you purchase a new computer for use with your Panoura 18S Digital Panoramic X-Ray system. A computer is NOT included with the purchase of a Panoura 18S. The computer needed has several atypical requirements so please double check the details of any computer you order to work with the Panoura 18S. Computer specifications detailed below are subject to change without notice.

  • Required Computer Specifications for ImageWorks’ Panoura 18S with EVAsoft Dental Imaging Software:
  • Operating System - Microsoft Windows 8.1 or 7 (64 bits) Professional 
  • Intel i5 processor or better 
  • RAM - 4 GB minimum 
  • Minimum of 2 available USB Ports that are PCI Express x1 o First slot is for dedicated Ethernet connection to the Panoura 18S. This is separate and in addition to connection to any Local Area Network (LAN) connections o Second slot is for a Serial RS-232 Port (Note: USB to RS232 adapters will NOT work) 
  • CD-R / DVD-R/RW 
  • Hard Drive - 500 GB 
  • Monitor with minimum resolution of 1280x1024 @ 32 bits color depth

 

Included with the Panoura 18S: 

  • Ethernet GIGIBIT (PCI express) provided 
  • RS232 Card (PCI express) provided

 

General Notes: 

  • Internet access is required to access the remote technical support provided by ImageWorks. 
  • ImageWorks strongly recommends that you consult your IT professional to ensure a Data Back-up system is in place for your dental office and the EVAsoft imaging software. 
  • Panoura 18S supports TWAIN for image transfers to imaging software other than EVAsoft Dental Imaging Software

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 32923035247

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 1600 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Computer
Bozeman, US
★★★★★ 4
Easy to assemble, does the job, material is shiny nylon and shows creases, minor defects, sloppy
Size: 3 Panel 12FT W, Size: 3 Panel 12FT W
The Siebwin room divider is a good idea, and for the price, it mostly delivers on the intended functionality. I ordered the 12 foot, 3-panel version mainly to hide an unfinished basement storage area that had become an eyesore. It works well for that purpose and gives the space a cleaner appearance without spending the kind of money that more decorative dividers or custom partitions cost. If you need something temporary, portable, or mainly functional, this is a viable option. There are a few limitations that became obvious during setup and use. The first thing I noticed was that the weld quality on some of the metal poles is fairly sloppy. Once the cover is installed, you do not really see it, but up close, it does not look especially refined or professional. The blackout material also is not a matte canvas style fabric as I expected. It has more of a shiny nylon appearance, and the creases are fairly visible. Being that it’s more of a nylon, I’d be hesitant to try steaming it to remove the creases. However, the creases do not matter if you are using it in a basement, dorm, or shared room, but for photography, video work, or a professional office setting, the appearance could be disappointing. The fabric is thick enough, though. It blocks visibility well enough, but strong light behind it still shows through to some extent, nothing deal-breaking. Also, my fabric appeared to be slightly defective. The hook and loop strip on one of the bottom sections was off-center and couldn't be totally attached because it was lined up with one of the legs. I originally hoped to use this as a video backdrop, but I will probably end up replacing the fabric with a proper green screen or canvas material while continuing to use the frame itself. For now, it does a good job of covering my basement junk. Assembly was actually easier than I expected and took roughly 15 to 20 minutes. The longer vertical poles are tethered together similarly to tent poles, which made setup straightforward and fairly intuitive. The shorter horizontal pieces slide and snap together to the top and bottom of the vertical assembly. After each section is assembled, the divider panels connect together with metal plates and two knurled screws (at the top and bottom), so no tools are really required. A few screws were difficult to start because paint had gotten into the threads, but once they caught, they tightened down normally. The feet install with similar knurled fasteners and help keep the divider reasonably stable. One thing to watch for during setup is the fabric orientation. There is one arrow indicator in the middle of the fabric to indicate up. However, if you need another indicator, the smaller hook and loop strip goes on the bottom while the longer strip goes on top. I realized mine was upside down right before finishing and had to redo it. I wasn't difficult to redo, despite the defect in mine. The overall design is practical and easy to move around. I do like that the panels can fold and bend into different shapes depending on the space. The widened feet help stability, although when trying to stretch the fabric tight, I noticed the poles sometimes wanted to overlap slightly at the joints. Tightening everything helped somewhat, but it still happened occasionally. The divider feels adequate for normal indoor use, though I would not expect premium durability or luxury-level fit and finish at this price point. The entire device can also be easily disabled and stored in a tote if you need it completely out of the way. It comes with assembly instructions, but even if you didn’t have them, it’s easy to build without them (save a mistake or two). In terms of value, I think the Siebwin divider mostly matches its price. Around $100 gets you a large freestanding partition with decent usability and easy assembly, but there are compromises in materials, appearance, and refinement. The defects are also off-putting, but hopefully you won't have them. Higher-end room dividers can easily cost two or three times more, so some of the tradeoffs are expected. I also noticed cheaper alternatives online, but based on the quality here, I suspect those would probably have even more issues. For practical home use, temporary privacy, hiding storage areas, or separating shared spaces, this is a good option as long as expectations stay realistic.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
T
Trendy Tales
Waukegan, US
★★★★★ 3
Works well but takes up more space than expected
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
This room divider does the job for creating a little extra privacy and was easy enough to set up. The panels feel decent quality and the wider feet help keep it more stable than some cheaper screens I’ve tried. My only issue is that it takes up a bit more room than I expected, especially with the feet sticking out. It’s still portable and folds away nicely, but definitely measure your space first. Overall it works well for separating a room or blocking off an area temporarily. i wish it came in other colors
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
K
Katrina Rhodes
Bozeman, US
★★★★★ 5
Nice divider, serves it's purpose well!
Size: 3 Panel 12FT W
This room divider worked out very well for what I needed. I wanted a simple way to create a little more privacy and separation in a larger room without doing anything permanent, and this divider was an easy solution. The panels provide good coverage, and the black color gives it a clean, modern appearance that blends in nicely with different décor styles. Assembly was fairly straightforward, and once set up, the wider feet helped keep the divider stable on the floor. I was especially happy with how flexible the panels are to arrange. You can keep it mostly straight, angle it around furniture, or create a more enclosed private space depending on the layout you need. The material allows light to filter through slightly while still offering a noticeable sense of privacy. I’ve used it for separating a workspace area, but it would also work well in bedrooms, apartments, dorms, studios, or shared living spaces. Another plus is that it can be folded and moved without too much effort when you want to change the setup. Overall, this divider delivers a good balance of functionality, portability, and appearance. It’s a practical option for anyone needing temporary room separation without installing permanent walls or curtains.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026
J
Jamie K.
Lowell, US
★★★★★ 5
Perfect for Adding Privacy to a Piano Studio
Size: 2 Panel 8FT W, Size: 2 Panel 8FT W
I Ordered the 2 Panel version which is way too big for my needs... that's on me. So keep in mind that the picture shows a fabric made for two panels only being used on one and hence it is not pulled tight; it would pull tight and not be so wrinkly if it was set up properly as two panels. The metal pools that make up the panels seem to be well made, stable, and of good quality. They were very easy to put together and they stand up tall with plenty of height. The appearance of it with the fabric on it isn't as elegant as it could be, but it still looks good enough. The material is plenty solid, not allowing light through it, and thereby making a solid barrier. I am using it to block the view out the studio door when a student is sitting at the piano to avoid distractions from the hallway. It will allow a student to enter the studio with our distracting the student who is at the piano.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2026
J
Just Me
Whiting, US
★★★★★ 5
Room Divider That Gives Instant “This Is a Separate Space Now” Energy
Size: 3 Panel 12FT W
The Siebwin 3 Panel Folding Privacy Screen is surprisingly effective at changing the feel of a room without requiring construction, commitment, or somebody yelling about load bearing walls. The 12 foot width gives a substantial amount of coverage, making it useful for creating privacy, dividing open areas, blocking visual clutter, or setting up temporary sections within larger rooms. This saved us a ton of time and money in our new studio and enabled us to create a kitchen and office in one room. The wider feet make a huge difference because flimsy room dividers that collapse every time someone exhales too aggressively are deeply annoying. This one feels more stable and grounded once positioned. The folding design makes it easy to move around or adjust depending on the space, and it folds down relatively compactly when not in use. It is basically the introvert curtain wall of dreams. The material has a clean, neutral look that blends well into different room styles without screaming “temporary office cubicle panic.” It works well for apartments, studios, shared spaces, dressing areas, or simply hiding the mountain of chaos you swear you are going to organize tomorrow. Practical, portable, and refreshingly easy to use without turning setup into a three hour emotional event.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 16, 2026

recommand products

2MP 8CH UNIVIEW KIT - 5X COLORHUNTER - 24/7 COLOR IMAGES - BUILT-IN MIC - HD FIXED TURRET ANALOG CAMERA WHITE 2.8MM UAC-T122-AF28M-W
177.63
Dwellings Of Eldervale: Wooden Tokens
15.00
5MP 8CH UNIVIEW KIT - 8X COLOURTHUNTER FIXED TURRET ANALOG CAMERA 2.8MM UAC-T125-AF28M-W
286.88
5MP 8CH UNIVIEW KIT - 6X COLOURTHUNTER FIXED TURRET ANALOG CAMERA 2.8MM UAC-T125-AF28M-W
228.20
Capital Lux 2: Pocket Edition
14.99