Girodisc Rear Replacement Rotor Ring Set - F8x M2, M3, M4 W/ Silver/Red/Gold CalipersGirodisc is a Braking Technology Company dedicated to developing the best quality high performance braking components and solutions. The company has been in business since 2003 and is guided under the direction of company Principal Martin Meade, who spent five years as an Engineer with Porsche Engineering Services, where he played a role in developing current Porsche technology. PRODUCT INFORMATION Need new rings for your Girodisc 2 Piece Floating
Girodisc is a Braking Technology Company dedicated to developing the best quality high performance braking components and solutions. The company has been in business since 2003 and is guided under the direction of company Principal Martin Meade, who spent five years as an Engineer with Porsche Engineering Services, where he played a role in developing current Porsche technology.
PRODUCT INFORMATION
Need new rings for your Girodisc 2-Piece Floating Rotor Set? We got them. Rings come complete with all new hardware and full instructions for re-assembly; but if you choose you can send us the hats and we will do all the re-assembly and turning of the rotors for only the cost of shipping.
This service is available for the life of your rotors. Price is for a pair of rings and 2 hardware kits. Additional hardware kits are available separately upon request.
The Girodisc iron rotors replace the factory carbon ceramic rotors with no modifications necessary. We strongly recommend changing pad material to one suitable for iron rotors.
The primary purpose of the Girodisc system is to reduce unsprung and overall vehicle weight. The secondary purpose is to increase the ventilation and cooling capacity of the brake disc while retaining it's original dimensions. This is accomplished by using two-piece disc construction. The central “hat” section of the disc is made from 6061-T6 aircraft specification aluminum.
The disc is made from cast iron, to the same specification and material as used by professional racing organizations. It is a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc. The rotor and hat have a floating mount system, which utilizes high strength alloy steel drive pins, manufactured by Girodisc to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by grade 12 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring clips on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.
Important Questions Answered
What is required to install the Girodisc system?
The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers and pads perfectly. Once the Girodisc system is in place, simply replace the cast iron rotor when needed. Some discs are larger in diameter and come with caliper spacers. If longer bolts are required, they are also supplied.
How does reducing weight of the braking system benefit the vehicle?
The Girodisc will generally weigh between 4 – 8 lbs less than the oe disc it will replace. This is due to the heavy cast iron hat section being replaced with lightweight, high strength aluminum. The mass of any vehicle requires energy to accelerate or decelerate. Reducing the vehicle mass improves acceleration, and requires less energy to be dissipated during deceleration. Rotating mass requires additional energy in order to increase or decrease its speed of rotation. Decreasing the mass of the disc has a great benefit due to reduction in rotational inertia. This will allow more of the braking force to be available to decelerate the vehicle, not the disc.
Additionally, the mass of the brake system is also unsprung mass. Reducing the unsprung mass has the additional benefit of improved suspension performance, resulting in enhanced ride and handling. Rotating masses require additional energy to vary the plane on which they turn. The lighter the disc, the quicker the response of the vehicle steering due to the reduction in gyroscopic effect/rotational inertia of the disc. As an example, compare the weight of the Ferrari 360 OE disc at 18.2 lbs, and the Girodisc at 14 lbs. The Girodisc is 4.2 lbs lighter per disc. Replacing all four discs will save 16.8 lbs of rotating, unsprung mass.
Why slotted discs?
The edges of the slots continuously clean and refresh the pad surface. This will allow the pads to have a maximized friction surface always available. Additionally, they prevent containments from collecting between the pad and disc interface. The disc is lightened, decreasing its rotational inertia. Slots prevent the formation of a water film on the disc in wet weather, maintaining the best brake response.
A note on drilled discs
Girodisc doesnotrecommend drilled discsfor high performance applications. The rapid heating and cooling cycles will cause cracking on the friction surface of a drilled disc. The use of high friction or racing pads will exaggerate this condition. Most pad manufacturers specifically recommend that their race pads not be used on a drilled disc for this reason. Girodisc can drill discs for an additional fee, if the customer is aware of the potential hazards of drilling the discs.
Note as example the cracking in this OE Ferrari 550 drilled disc after one track day. Also note this custom front disc of a Porsche 993 Turbo after hard use (see photos).
Please see photos attached
Should new discs and pads be bedded in and if so, how?
The answer is yes, for optimum performance, any time different friction materials or discs are introduced, a bedding procedure should be carried out.
Which direction should the discs rotate?
For maximum airflow and superior cooling, the Girodisc system uses curved vanes. For a curved vane internally vented disc, the geometry of the vanes dictates the direction of rotation. A curved vane disc must be installed with the vanes running back from the inside to outside diameters in the direction of rotation. Your discs will come with labels indicating their correct placement on the vehicle. Orienting the disc in this manner creates a centrifugal pump. The rotation of the disc causes air to be pumped from the center of the disc, through the vanes, and out through the outside diameter of the disc. This greatly enhances the disc’s ability to dissipate heat. Discs installed backwards have very limited cooling.
Models
2 Series / F87 M2 (2016-2021) / M2 Competition
2 Series / F87 M2 (2016-2021) / M2
2 Series / F87 M2 (2016-2021) / M2 CS
3 Series / F80 M3 (2014-2019) / M3
3 Series / F80 M3 (2014-2019) / M3 Competition
3 Series / F80 M3 (2014-2019) / M3 CS
4 Series / F82 / F83 (2014-2019) / M4
4 Series / F82 / F83 (2014-2019) / M4 Competition
4 Series / F82 / F83 (2014-2019) / M4 CS
4 Series / F82 / F83 (2014-2019) / M4 GTS
Shipping Notes
Free Standard Shipping on $100+ Orders to the USA.
Except Preorder products are shipped in 48 hours.
Delivery to the USA:
Standard Shipping : 3-10 business days
If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
We offer a 30-day return/exchange service after receiving.
Final sale items are not eligible for returns or exchanges.
To process your return/exchange, please contact us at [email protected]
Clean ingredients, nice soap overall but doesn’t have the best lather
4-stars because it doesn’t lather great, but all smell good and my skin is happy— good quality overall! Clean ingredients just as advertised. Just as a side note, the loofa bag it comes with is a bit too rough for my skin so I’ve been using a washcloth.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 24, 2025
D
Verified Purchase
den Braber
Lowell, US
★★★★★ 1
To fell clean not dirty with this siap
Not a very good soap wouldn't buy it again.very dissatisfied for the price.soap smells like kerosene and barely any suds.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 14, 2026
A
Verified Purchase
Amazon Customer
Waukegan, US
★★★★★ 5
Great Value
I'm always looking for a deal on hand and body soap. For the price and what you get they're great. A couple of them aren't my favorite smells, but then again, that's the trade off I made.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
S
Verified Purchase
SYJ
Carnegie, US
★★★★★ 5
"Bowser, those Chinese never did stand a chance." - Marine general O.P. Smith
Format: Hardcover
The signs was already there. To anyone that bothered to look.
But prejudice and victory fever had blinded the top brass to what was unfolding on the ground.
Luckily for the men on the ground, there was one top brass that saw the signs, and acted on it.
That was the overall situation for the men of the 1st Marine division and the 7th Army division in November 1950.
While McArthur and his entourage were busying themselves with the planning of victory parades in Tokyo and promoting a 'Home by Christmas' atmosphere to the press, general O. P. Smith was already laying the ground work for what would determine the outcome of the Chosin reservoir campaign.
In the surrounding snow covered hills and mountains, a vast number of Chinese soldiers from the 9th Army was being rushed into position to spring the trap that McArthur and Almond was walking into.
What followed was a series of battles that was almost as brutal as the weather. I say almost, because the biggest killer of Chinese troops, wasn't American bombs and bullets, but the winter. One of the coldest in Korean history. Accompanied by the howling wind sweeping down from Manchuria and Siberia.
Both sides made their share of mistakes.
McArthur, for rejecting any intel showing that Chinese troopes were in Korea.
General Song Shilun, who's troops had been told American soldiers were 'paper tigers'. As such, the PLA, anticipating a quick and easy victory, withheld winter cloths and issued only 2-3 days worth of rations while ordering their troops to make a 60 mile forced march from the border, across snow covered forests and mountains, to the reservoir.
When the order to attack came, the troops were already in the early stages of starvation.
Not only did the Marines held their ground, they annihilated the Chinese units. To make matters worse, their primitive means of communication made it impossible to coordinate their attacks. While as the Marines, despite being surrounded, was able to grind the Chinese units down through a combination of Marine Air Wing, combined arms and gung ho spirit.
That, and general Smiths precautions allowd both the Marines and the Army units to fight their way out of a calamity caused by the prejudicial ignorance of McArthur and Almond.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 12, 2026
Promo Codes Available: