Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 13 - Jul 18
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Lemon RX LM0087XT60 DSMP 10ch RX Telemetry, Stabilizer & Energy MeterWhen your aircraft needs more than a basic receiver, bolting in a separate stabilizer, telemetry sensor and voltage monitor can turn a clean install into a tiny wiring swamp. The Lemon RX LM0087XT60X keeps the important bits in one compact DSMP 10 channel telemetry stabilizer receiver with an XT60 energy meter, built for DSMX DSM2 compatible RC aircraft setups. It gives you full range control, gyro stabilization, telemetry, and flight pack energy
When your aircraft needs more than a basic receiver, bolting in a separate stabilizer, telemetry sensor and voltage monitor can turn a clean install into a tiny wiring swamp. The Lemon RX LM0087XT60X keeps the important bits in one compact DSMP 10-channel telemetry stabilizer receiver with an XT60 energy meter, built for DSMX/DSM2 compatible RC aircraft setups.
It gives you full-range control, gyro stabilization, telemetry, and flight-pack energy monitoring in a 16.3g unit measuring 66x15x24mm. The built-in barometer supports altitude and varios telemetry, while the XT60 V/I sensor setup reports flight-pack voltage and current up to 5S LiPo / 21V max and 60A max. Useful information, less guesswork, fewer post-flight battery autopsies.
The LM0087XT60X also supports normal, delta and V-tail mixing, separated dual aileron stabilization, all-channel failsafe, dual BEC inputs, antenna diversity, an optional satellite port, channel 8 real-time gain control, and three onboard gain pots. Receiver power range is 3.9V to 8.5V, so it fits common BEC and receiver battery setups without needing a doctorate in small wires.
Lemon Rx products are tested to be compatible with Spektrum's DSMX and or DSM2 product (Spektrum, DSMX and DSM2 are the registered trademark of Horizon Hobby, Inc.).
Quick Reference Guide
Reset stabilizer
- Connect power
- Hold F and B buttons (approximately 5 secs+) until all LED flashes randomly
- Press the C button. Multiple LEDs flash a few times to complete the operation
Bind with bind plug
- Insert bind plug on Channel 10
- Connect power
Bind without bind plug
- Connect power
- Hold the B button until the red LED flashes
Bind with a satellite without a bind plug
- Connect power
- Hold the B button until the red LED flashes
- Disconnect power
- Plug the satellite wire connector into the stabilizer
- Connect power
Failsafe
- Connect power to the receiver and ensure the servos are working with the transmitter
- Press the F button for 3 seconds until green changes from off to on and vice versa to change the failsafe setting. Channel value is saved as failsafe default at the time the green LED turns on.
- Turn off the transmitter and wait 2 seconds to ensure the failsafe is activated accordingly by ensuring there is torque generated with finger-pushing the servo linkage if it was to be set. Vice versa.
Stabilization activation switch
- Disconnect power
- Insert bind plug to channel 8
- Hold the C button
- Connect power. Wait for about 1 second until the 6 LEDs flash.
- Release the C button
- Press C to make changes within 3 seconds. Green = CH7, Blue = CH5.
- Wait for 3 seconds and remove the bind plug
Wing Mode and Dual Aileron
- Disconnect power
- Insert bind plug to channel 9
- Hold the C button
- Connect power. Wait for about 1 second until the 6 LEDs flash
- Check the receiver label/user manual to understand the referred LEDs' operation
- Release the C button
- Observe which red LED is flashing and brief press C to select the required mode
- Press C to toggle between settings. On means selected. Exit automatically in 5 seconds.
- Wait for 3 seconds and remove the bind plug
- Ensure transmitter mixing is set accordingly for dual aileron if stabilized dual aileron is to be configured.
Gyro direction
- Check the receiver label/user manual to understand the referred LEDs' operation
- Connect power and wait 1 second
- Hold the C button and wait for about 1 second until the 6 LEDs flash
- Release the C button
- Observe which red LED is flashing and brief press C to select the required mode
- Press C to toggle between settings. On means selected. Exit automatically in 5 seconds.
- Wait for 3 seconds and remove the bind plug.
V/I sensor calibration
- Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
- Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.
- Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds
- Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor.
- Press F or C button briefly
- Observe 3 red LED flashes
- Turn on the DC loading device by throttling the transmitter. Ensure 4A is drawing across the V/I sensor. Be careful with the motor spinning if it is to be used.
- Press the B button to save and exit.
V/I probe calibration
- Turn on the receiver and transmitter. The telemetry report page may optionally be checked during and after calibration.
- Plug the V/I sensor. Make sure the required DC loading device such as a brushless motor with ESC as well as the current and voltage meter is connected.
- Press the F and B buttons together at the same time for 2 seconds but no greater than 5 seconds
- Observe 3 green LED flashes. Ensure 8.4V is provided to the V/I sensor.
- Press F or C button briefly
- Observe 3 red LED flashes
- Press the B button to save and exit.
Gain setting
- Adjust via the 3 dials or real-time master gain on channel 8 depending on the transmitter channel's availability.
View setting LEDs with all on
- Press the C button briefly (no more than 2 seconds).
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 1689 reviews
Sort
Product Reviews
★★★★★ 5
Solid, grippy, and they don’t roll away!
Style: 10 Pound, Pair
I bought these because I’m finally trying to build a consistent home workout routine and didn't want to drop a fortune on name-brand weights. I’ve been using this 10lb pair for about a month now for everything from overhead presses to lunges, and honestly, they’re exactly what I was looking for.
The Pros:
• That Neoprene Grip: The coating is fantastic. Even when my hands get pretty sweaty halfway through a workout, I don’t feel like I’m going to drop them. It’s a much "softer" feel than cold metal or hard plastic.
• The Hex Shape: This is a small detail that makes a huge difference. Since the ends are hexagonal, they don't roll across the floor when I set them down between sets. They also stay put if I’m using them for "renegade rows" or floor work.
• Compact Size: They aren’t bulky. I can easily shove them under my bed or in the corner of the closet when I’m done.
• No Weird Odor: I was worried they might smell like a tire factory (which happens with some rubber-coated weights), but these had almost no scent right out of the box.
The Cons:
• Handle Diameter: The handles are a little on the thicker side. I have medium-sized hands and it’s fine, but if you have very small hands, they might feel a bit chunky to wrap your fingers all the way around.
• Color Scuffs: The navy blue looks great, but if you clank them together or drop them on concrete, the coating can scuff or show dust pretty easily.
The Verdict:
If you just need a reliable set of weights for HIIT, Pilates, or general strength training, these are a no-brainer. You're basically getting gym-quality equipment for a fraction of the price. I’ll probably be back for the 15lb set in a few months!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 27, 2026
★★★★★ 5
Really Nice Hydrating Toner Pads
Scent: Collagen, Scent: Collagen
At 52, post-menopausal, with dry and increasingly sensitive skin, I’m very selective about toner pads. Many of them either feel too thin and ineffective or too active and irritating. These landed right in the middle in the best possible way — gentle, hydrating, and very easy to use.
The first thing I noticed is how well these pads are saturated. They’re not dripping, but they hold enough product to comfortably treat the entire face. The gel texture also makes them feel a little more substantial than typical toner pads, which I really like. They feel cooling and comfortable on the skin.
What I notice most after using them is how hydrated and slightly plumped my skin looks. This isn’t dramatic or instant, but it’s the kind of improvement that makes your skin look healthier and more comfortable. My skin feels smoother and softer, and it layers very well with the rest of my routine.
They also feel very lightweight. There’s no sticky or heavy residue, and once the essence absorbs, my skin just feels hydrated and calm. I can easily follow with serums and moisturizer without any pilling.
I also appreciate that these pads are gentle and very skin-compatible. I’ve had no irritation, redness, or sensitivity, even on days when my skin is feeling more reactive. At this stage, that matters more than aggressive results.
In terms of moisture, these do a really nice job. My skin feels comfortable after using them, and they work well as a prep step before the rest of my routine. On some mornings, they even give enough hydration that I don’t feel rushed to apply moisturizer immediately.
Fragrance is also worth mentioning. The scent is very light and subtle, and it doesn’t linger. I’m careful about fragrance, and these didn’t cause any sensitivity or irritation.
Another thing I like is how easy they are to use. They’re quick, convenient, and a nice step when I want hydration without adding another liquid toner.
Overall, these feel like a supportive, hydrating step that helps improve overall skin quality over time. They’re gentle, comfortable, and easy to incorporate into a daily routine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 12, 2026
★★★★★ 5
Love These Toner Pads
Scent: Collagen
I’ve really been enjoying these Biodance Collagen Gel Toner Pads! They feel super refreshing on the skin and are an easy step to add into my routine. The pads are well-soaked without being messy, and they glide on smoothly.
After using them consistently, my skin feels more hydrated and looks a bit more plump and smooth. I’ve also noticed my pores appear slightly minimized, especially around my T-zone. They’re gentle enough for daily use and don’t irritate my skin.
Overall, a great option if you’re looking for a simple way to boost hydration and improve your skin’s overall look and feel!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026
★★★★★ 5
Finally!!
Scent: Collagen
I have had huge pores with combination oily skin and dry skin since reaching my mid 30’s and makeup made them more prominent. Since adding these to my morning routine my makeup stays smooth with my pores minimized and skin looking and feeling healthier. After trying multiple products I finally found THE ONE.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 28, 2026
★★★★★ 5
Great product
Scent: Collagen
Been using this for several months and love love it. My skin is moisturized and has decreased the visibility of fine lines. This is a staple in my skin care routine.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026