Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 14 - Jul 19
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
ICON 64039 Track Bar Bump Steer Bracket KitThis ICON Vehicle Dynamics 2008 2023 Ford Super Duty Track Bar Bump Steer Bracket Kit is a bolt on solution to correct the steering geometry of lifted applications. After many miles of real world on and off road testing ICON's R&D department has identified this issue and has quickly produced this product to further improve the performance and drivability of the Ford Super Duty platform. This bracket features a 2 position cam that will optimize the
This ICON Vehicle Dynamics 2008-2023 Ford Super Duty Track Bar Bump Steer Bracket Kit is a bolt-on solution to correct the steering geometry of lifted applications. After many miles of real world on and off-road testing ICON's R&D department has identified this issue and has quickly produced this product to further improve the performance and drivability of the Ford Super Duty platform.
This bracket features a 2-position cam that will optimize the track bar geometry for both 2.5" and 4.5" lifts. This component has been designed to work with both a factory track bar as well as an ICON Vehicle Dynamics adjustable unit and will allow for the axle to be properly centered under the frame with either. Benefits of this improved geometry and axle alignment include reduced road feedback throughout the steering system and improved on and off-road manners thanks to the elimination of bump steer.
The ICON 64039 Track Bar Bump Steer Bracket Kit is what your lifted 2008-2023 Ford F-250/350 4WD needs. This 2008-2023 Ford F-250/F-350/F-450 Track Bar Bump Steer Bracket Kit features a fabricated steel construction, protected by a durable semi-gloss powder coat finish, and carries a lifetime warranty against breakage or manufacturer defect. ICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for enthusiasts that demand the highest levels of performance, ruggedness, and durability out of their suspension systems.
This bracket features a 2-position cam that will optimize the track bar geometry for both 2.5" and 4.5" lifts. This component has been designed to work with both a factory track bar as well as an ICON Vehicle Dynamics adjustable unit and will allow for the axle to be properly centered under the frame with either. Benefits of this improved geometry and axle alignment include reduced road feedback throughout the steering system and improved on and off-road manners thanks to the elimination of bump steer.
The ICON 64039 Track Bar Bump Steer Bracket Kit is what your lifted 2008-2023 Ford F-250/350 4WD needs. This 2008-2023 Ford F-250/F-350/F-450 Track Bar Bump Steer Bracket Kit features a fabricated steel construction, protected by a durable semi-gloss powder coat finish, and carries a lifetime warranty against breakage or manufacturer defect. ICON Vehicle Dynamics products are proudly designed, manufactured, and assembled in Riverside, California by a team of passionate off-road enthusiasts. With a reputation for quality, performance, and service it's clear that ICON Vehicle Dynamics is the top choice for performance suspension systems and shock absorbers for enthusiasts that demand the highest levels of performance, ruggedness, and durability out of their suspension systems.
Features:
- Bolt-On Design Utilizes Factory Frame Holes For Simple Installation
- Corrects Bump Steer Geometry
- 2-Position Cam Optimized For 2.5" & 4.5" Lifts
- Centers Front Axle Under Frame With Factory Track Bar
- Reduces Road Feedback Through Steering
- Durable Satin Black Powder Coat Finish
Note: Compatible with 4WD models only
Bump steer correction is intended for 2.5" or 4.5" lifts with the use of the factory track bar or an ICON track bar set to the factory length.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 299 reviews
Sort
Product Reviews
★★★★★ 5
Overdo is what I do
Size: 13"-32", Style: Single
Since my 50" monitor is under the 22lb weight limit, I decided to give this arm a shot. Nobody seems to make an arm for something as big as a 50-inch even if they don't actually weigh that much.
So what happened? The arm CAN support that weight and size. The manufacturer did a great job on the materials and it assembles very easily. For a regular monitor, this arm should work great.
But the clamp design is not exactly sturdy enough for my bigger screen that exceeds the intended use. Clamped to the table top alone, the pole had a serious and unsafe lean to it. I ended up reinforcing my table with three layers of plywood secured with lag bolts right through the table top. Between the layers of plywood is the table top and a steel beam that the table top sits on. So this is a ridiculously strong base. With that in place, the arm does hold the monitor in the fully retracted position. Extended, there is way too much leverage and the arm starts to lean. So don't do that. It needs to stay totally retracted to the pole.
To fit my monitor, I had to get VESA extension wings and those worked fine. This provides the solution I am going to use: angle irons bolted to the wings and running down to the table. I have room to do this. The angle irons will take up most of the weight and let the arm stay vertical and let me move it around. So it will be a three-legged mount instead of one. Eh. It will work fine for me until I come up with something better.
Very tempted to drill holes in the clamp base and lag bolt that to the table. Nothing is going to beat that except welding it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2022
★★★★★ 5
27" monitor mounted easily
Style: Single Arm, Size: 13"-34", Style: Single Arm, Size: 13"-34"
I ended up getting 2 of these monitor arms for the different desks in our office, and I am happy with both of them. The arms are super easy to assemble and adjust to the tension one desires. The arms hold the position where one sets them too, and the gas pistons make it super easy to use.
Each arm has a channel on the bottom that allows the wiring to be ran through and hidden, yet remaining accessible if needed. The mounting clamps hold securely and there is no wiggle whatsoever, and it is nice to have a strong feeling monitor mount.
It is lightweight and compact so it doesn't feel clunky on the desk. Highly adjustable left to right, up and down, and the screen forward and backward tilt. The price is really good for the overall value and quality of the product. Just make sure to order the right mounting arm depending on the size of your monitor, and you will be fine.
Nice quality and feel, and the aesthetics are great too.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2026
★★★★★ 5
Get this one!
Style: Dual Arms, Size: 13"-32", Style: Dual Arms, Size: 13"-32"
I got this dual monitor arm for my home office, and it’s been a total game changer. Having a dual monitor setup makes multitasking so much easier, especially for photo and video editing.
Setup was incredibly quick (under 5 minutes), and it feels very secure once mounted. I really like how stable it is and how easy it is to adjust the height and angle.
It also helped clear up a lot of desk space since I no longer need bulky monitor stands. Simple design, but it works perfectly. Highly recommend for both single and dual monitor setups. Great value for the price!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 22, 2026
★★★★★ 5
Pretty great product
Style: Dual Arms, Size: 17"-33"
Stand works great and as expected. I have a 32” monitor on one and a 26” ultra wide in the vertical position on the other.
I’ve had them for a few months and they’ve held tension perfectly. Usually, I find these spring tension arms to become loose after a few months and you just tighten them back up, these are still stiff like when I first set them up, and I move them around quite often. The monitors can rotate 360 degrees and tilt up and down almost 90 degrees each way.
The clamp is sturdy so you will feel comfortable making sure it’s tight on the desk. I do plan on drilling a hole to mount the desk to mount it without a clamp and will update my review when I do so. It comes with the hardware to do either mounting options.
They're made entirely of metal except for the plastic cable trays that clip along the bottom of the arms. The entire build is well worth the cost and gives me more space on my desk and helps my workflow when editing photos or editing video.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
★★★★★ 4
Pretty good product
Style: Single Arm, Size: 13"-34"
Assembly of the actual stand is easy, mounting to a monitor is not because of industrial design fluff. Gotta make the side you DON'T see look "sleek" and "smooth" and "organic" and "integrated" because...reasons. While this is on the manufacturer(s) of the monitor itself, what semi-modern monitor uses 100x100 VESA anyway?
The included long screws are too long. Even using the plastic spacers they'll bottom out with a 2mm gap; add washers and it's a lever arm and not solid or confidence-inspiring. I used a die grinder to remove the excess material closer to 75x75 and used the included short screws, perfect. So either include 25mm screws instead of the 30mm (but then the spacers would be too long), or just update the mount plate to 75x75 only, and throw 100x100 "compatibility" into the dustbin of history where absolutely no one will miss it.
Arm does move/adjust smoothly and is holding a 34" widescreen where I left it 2 days ago, so it IS a great product once it's properly fitted.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 22, 2026