SKU: 18919815527

FUEL HANGER EVO 7-8-9 PUMPS NOT INCLUDED AEM 50-1220 E85

$179.07 $198.97
Save 10%
No.2 Bestseller on pluriversity.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

FUEL HANGER EVO 7-8-9 PUMPS NOT INCLUDED AEM 50-1220 E85The Radium Engineering fuel pump hanger allows the use of 1 or 2 aftermarket pumps in the stock Mitsubishi Evo 7 8 9 fuel tank. This system is ONLY compatible with Walbro pumps (Ti Automotive F90000267 F90000274 and F90000285) and the short AEM 50 1220 E85 pumps. The machined assembly drops in the factory fuel tank replacing the OEM hold down flange. A single 8AN male pump feed port and 6AN male return port simplify aftermarket AN hose plumbing.

The Radium Engineering fuel pump hanger allows the use of 1 or 2 aftermarket pumps in the stock Mitsubishi Evo 7-8-9 fuel tank.

This system is ONLY compatible with Walbro pumps (Ti Automotive F90000267 F90000274 and F90000285) and the short AEM 50-1220 E85 pumps. The machined assembly drops-in the factory fuel tank replacing the OEM hold-down flange. A single 8AN male pump feed port and 6AN male return port simplify aftermarket -AN hose plumbing. However the preassembled adapter fittings are compatible with the OEM fuel lines.

The custom designed stainless electrical studs easily handle the high current demand that compact bulkhead connectors lack. These serviceable connections are properly sealed and impervious to all standard and exotic fuels. The low profile design keeps all wiring tucked nicely underneath the OEM cover plate. Nonconductive acorn nuts are provided to prevent any accidental short circuits. Furthermore the high quality in-tank wiring is insulated with chemically resistant ETFE. Electrical hardware is included for the fuel pump(s) and OEM level sender.

One major issue with the OEM EVO 7-8-9 fuel pump hanger is the restrictive return port and venturi jet pump. When using aftermarket high-flow fuel pumps the OEM jet pump becomes too restrictive creating unwanted backpressure in the regulator return line causing excessive fuel rail pressure. The Radium fuel pump hanger includes a venturi jet pump with a new integrated pressure-relief valve to minimize back pressure.

All returning fuel from the pressure regulator and crossover hose exit the jet pump keeping the OEM gas tank baffle full for starvation protection.

Single pump applications can reuse the OEM fuel pump controller wiring but it is recommended to upgrade the OEM wiring as these high flow fuel pumps draw additional current requiring larger gauge wire. Select qty1 for single pump applications and qty2 for dual pump applications.

Features
-Anodized Aluminum Mounting Plate
-Venturi Jet Pump with Pressure Relief Valve
-8AN Male and OEM Compatible Pump Outlet Fittings
-6AN Male and OEM Compatible FPR Inlet Fittings
-Anodized Aluminum Dual Pump and Fuel Sender Bracket
-Electrical Hardware for Fuel Pumps and OEM Sender
-Fluorosilicone Duckbill Return Valve
-Submersible Rubber Fuel Hose
-Stainless Steel Hardware and Clamps

Pump Configuration Selection
If supplying your own pumps select the option "Pumps Not Included" from the menu.
Notes:
1. There will be enough components included with this option to use 1 or 2 fuel pumps. Depending on the setup some parts will simply not be used (20-0345-00 shown below).

2. A pliable fuel pump filter sock must be used for proper fitment.

If pumps are included the kit will come preassembled and 65 micron sock filters will be installed on all fuel pumps.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 18919815527

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 2070 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
MRF
Bozeman, US
★★★★★ 5
Good solid product
Purchased in February of 2025. Very solid item. Use it constantly in our 2011 4Runner and 2017 CX5. This unit attaches firmly to vent fins in both cars. I use iPhone for maps programs and streaming music. When traveling I'm constantly rotating device 90 degrees to use phone in portrait and landscape positions. Unit has shown no signs of losing ability to firmly hold desired position despite frequent rotations. It holds firmly where you place it. Initially I had concerns about placement on dash and blocking view of radio face, clock, MPG indicator, and other displays. Didn't take too long to realize the flexibility of this thing and the many, many positions you can place it due to multiple rotational joints. Pricing was fair. If this ever wears out, I will want to buy another.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 8, 2025
B
Verified Purchase
bspeakes
Lowell, US
★★★★★ 5
Happy with purchase, easy to install, exactly what I needed
For many years, I'd been using a similar item with a wedge-type vent mount that finally stretched out and became unusable. When searching for a replacement, I wanted to try one with a different type of mount and I looked at many brands/types of holders. This one seemed to be the best item for the price ($8.99 at the time). So far, I'm very happy with it. I got it in a timely manner, and it was exactly as advertised. I had no problems attaching the hook to the vent fin and securing it. I use it for a GPS, and since the holder is designed to stand out away from the vent a bit, my device is easier to see than previously and details are easier to read. It wobbles, occasionally, but the holder's not loose, at all, and it doesn't affect my ability to read the device. The frame is barely just big enough to hold my GPS, but so far that hasn't been a problem. The device slides into the frame easily, locks securely, and stays put. The holder pops open at the touch of a button on the back, and the device can be removed easily, without issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 19, 2023
M
Verified Purchase
Marooned
Los Angeles, US
★★★★★ 3
Prevents me from adjusting the air vent up or down
It's true that it doesn't block the air flow. I had to put it on the left passenger side vent to retain the ability to point the driver's air vents where I want. With it over there, I have to turn my head too far to the right when I'm driving to see my phone, and the passenger can't adjust the vent up or down. Also, phone can't tilt as far left and right as other ones. Good price, unique design, easy to install, feels sturdy, holds iPhone SE fine, and doesn't block my view of the entertainment system.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 27, 2026
S
Verified Purchase
ShopDoc1
Dallas, US
★★★★★ 5
BETTER THAN A CUP HOLDER
I had a cup-holder mount and it was always falling apart. No matter how it was turned, to unfasten my phone I had to move the spring part of the holder in the same direction that removes the entire clip from the stem of the mount. Of course, I eventually lost the clip. What a bad idea. And, in a 4-Runner, on my cupholder, MAPS sometines got lost and I would have to hold my phone up to the windshield for a minute to get back MAPS back on track. Also not a good Idea. We're not supposed to be handeling a phone and driving so holding my phone up to the windshield is kinda like flagging down a cop. (The 4-Runner has hand-free phone service, as well as some kind of circuitious navigation but it's always lost.) . So, for about $9 on sale, I though I would try one of these LISEN mounts. It works great ! Really. Easy to attach securely but scratchlessly it to my center AC/heat vent and It is infantly moveable. Swing the arm 360 degrees, in and out, phone up or saideways, and tilt the phone to me or the Boss. If I get bored, I can relocate it anywhere along the center vents, or even over to my side vent if I have nothing better to do.. It is sturdy, quiet, easy to clamp in my S21, and release is simplye by pushing the button on the back. Sooo much better that my previous mount, for a third of the price. It might be the best $9 you ever spent. And still worthwhile,if you have to shell out the $18. (But I always try to avoid paying full price for anything). Enjoy !
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 10, 2023
S
Verified Purchase
Spark Yip
Battle Creek, US
★★★★★ 5
Usable but average, with only basic build quality and stability.
This in-car phone mount is fairly average overall. It’s easy to install and works for basic navigation needs, but the build quality isn’t particularly impressive. The materials feel a bit ordinary, and stability can be an issue on rough roads, with some looseness over time. It’s usable, but not outstanding.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 10, 2026

recommand products

FANCY DOLA SILK SAREE
258.50
Spyder GMC Sierra 14-16 LED Tail Lights Black ALT-YD-GS14-LBLED-BK
127.50
Spyder Honda Accord 2013-2015 4DR Projector Headlights Light Bar DRL Black PRO-YD-HA13-LBDRL-BK
224.50
Spyder Mercedes Benz S-Class 03-06 Projector Headlights Xenon/HID Model- Chrm PRO-YD-MBW220-HID-C
247.50
xTune Mazda Rx-8 04-08 LED Tail Lights Black ALT-ON-MRX804-LED-BK
138.50