Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 12 - Jul 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
SDG1062XSiglent Function Arbitrary Waveform Generator 2CH 60MHz 150MSa s 16kpts 14bits 4. 3inch TFT LCD (260107295mm) 4. 35kg Arbitrary Waveform Generator Overview SIGLENTs SDG1000X is a series of dual channel function arbitrary waveform generators with specifications that include up to 60 MHz maximum bandwidth, 150 MSa s sampling rate and 14 bit vertical resolution. The proprietary EasyPulse & TrueArb technique helps to solve the weaknesses inherent in
Siglent Function / Arbitrary Waveform Generator 2CH 60MHz 150MSa/s 16kpts 14bits 4.3inch TFT-LCD (260×107×295mm) 4.35kg
Arbitrary Waveform Generator
Overview
SIGLENT’s SDG1000X is a series of dual-channel function/arbitrary
waveform generators with specifications that include up to 60 MHz
maximum bandwidth, 150 MSa/s sampling rate and 14-bit vertical
resolution. The proprietary EasyPulse & TrueArb technique helps to
solve the weaknesses inherent in traditional DDS generators when
generating pulse and arbitrary waveforms, and the special square
generator is capable of generating square waveforms up to 60 MHz
in frequency with low jitter. With these advantages, the SDG1000X
can provide users with a variety of high fidelity / low jitter signals
while meeting the growing requirements of a wide range of
complex and varied applications.
Feature
- Dual-channel, with bandwidth up to 60 MHz, and amplitude up to 20 Vpp
- 150 MSa/s sampling rate, 14-bit vertical resolution, and 16 kpts waveform length
- Innovative EasyPulse technology, capable of generating lower- jitter Pulse waveforms, brings a wide range and extremely high precision in pulse width and rise/fall times adjustment
- Innovative TrueArb technology, based on a point-by-point architecture, supports any 2 pts ~ 16 kpts Arb waveform with a sampling rate in range of 1 μSa/s ~ 30 MSa/s
- Special circuit for Square wave function, can generate Square waves up to 60 MHz with jitter less than 300 ps+0.05 ppm of period
- Plenty of analog and digital modulation types: AM, DSB-AM, FM, PM, FSK, ASK, PSK and PWM
- Sweep and Burst functions
- Harmonics Generator function
- Waveform Combining function
- High precision Frequency Counter
- Standard interfaces: USB Host, USB Device (USBTMC), LAN (VXI-11)
- 4.3” TFT-LCD display
Specifications
- Bandwidth : 60 MHz
- Sampling rate : 150 MSa/s
- Vertical resolution : 14-bit
- Waveform Length : 16 kpts
- Num. of channels : 2
- Max. amplitude : ±10 V
- Display : 4.3” display, 480 x 272 x RGB
- Interface : Standard: USB Host, USB Device, LAN
Downloads
Additional Information
| Device | Generator |
| Type | Arbitrary | Waveform |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 2345 reviews
Sort
Product Reviews
★★★★★ 5
BUY THIS ONE!
Model: NewSLS50_52
This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ.
Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that.
Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 26, 2025
★★★★★ 5
Good stuff, but watch the temp
Model: NewSLS50_52
I used this in my single cab pickup truck (89 ford.) It only took half the box (10 sheets or 25 square feet) to do the floors, but I bought the big box because I plan to do the doors, back wall, and maybe the roof as well. One thing I learned is that the temperature matters when you’re doing the installation. It was around 55F when I started in the evening, and when it dipped down into the 40s the sheets would not stick to the metal, and were hard to compress with the roller. That’s why I ended up only doing the floors and not any vertical surfaces; i will have to wait for a nice hot day. The other thing is that the foil layer on top is razor sharp at the edges, definitely wear gloves! I didn’t notice until after but I have little papercuts all over my fingers. Aside from those things, the install was easy and straightforward. The sheets cut easily with scissors, and any goo that ends up on your hands or scissors can be cleaned up with acetone (nail polish remover), or lacquer thinner. I would use this stuff again.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 16, 2023
★★★★★ 5
Very efficient!
Model: NewSLS50_52
Amazing the difference it makes on dumping the noise. Very easy to install. Pell and stick literally! Great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 23, 2025
★★★★★ 5
Supports DP Alt + Power Delivery from one source
This is one of the very, very few USB-C hubs out there that successfully pushes DisplayPort Alt and 100w PD functionality from one source cable to one device. My monitor has a USB-C DP alt port that also pushes 95w PD and this hub successfully pushes both of those to my laptop, phone, and android handheld console. The marketing material says something about USB PD cannot work with DP alt, but it seems to be working fine for me so who knows. With this little hub in-between the link from the monitor to the device, I can now add a USB ethernet adapter and game controller, and I only ever have to plug one USB-C cable into my device (and I am using a USB4 extension cable with no issues as well) and it all works perfectly!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 21, 2026
★★★★★ 5
Supports Reverse Charging a Laptop on Monitors with USB-C PD!
This adapter is unique in that it supports reverse charging + video on the same port. I use this with an LG monitor (60W PD) and an M1 Pro Mac.
At first, I had connectivity issues: hub was disconnecting and reconnecting every few seconds. I followed advice to update the firmware on the hub, but that didn't solve the issue. Turns out, my monitor also needed a firmware update. Once I updated the monitor firmware, it stabilized and has been working great ever since.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 4, 2025
recommand products
Inoar Cicatrifios Capillary Plastic Shampoo & Conditioner Kit 34fl.oz 1000ml
69.00
PORTIER EXCLUSIVE TRATAMIENTO PARA EL CABELLO 1000ml
94.50
Forever Liss Intensive Black Hair Toning Kit. Long-Lasting, Vibrant Black Hair for Lustrous Shine and Deep Color
45.00
Inoar Argan Infusion Hair Fall Control Vegan Kit
47.60
Maria Escandalosa Okra D-Tox Hair Pro Repair Fiber Restore Mask 35oz 1kg
60.00