SKU: 24746899628

Sherwin-Williams Eco-HTS™ 100 | High-Tensile Strength Floor Coating

Sale price$157.50 Regular price$175.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 12 - Jul 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Sherwin-Williams Eco-HTS™ 100 | High-Tensile Strength Floor CoatingSherwin Williams Eco HTS 100 High Tensile Strength Floor Coating Two Component High Tensile Strength Floor Coating for Commercial & Industrial Concrete Brand: Sherwin Williams Sherwin Williams Eco HTS 100 is a two component, 100% solids, solvent free floor coating formulated for demanding commercial and industrial concrete floor applications. Designed for professional installers and facility managers requiring a tough, durable floor coating on

Sherwin-Williams Eco-HTS™ 100 | High-Tensile Strength Floor Coating

Two-Component High-Tensile Strength Floor Coating for Commercial & Industrial Concrete | Brand: Sherwin-Williams

Sherwin-Williams Eco-HTS™ 100 is a two-component, 100% solids, solvent-free floor coating formulated for demanding commercial and industrial concrete floor applications. Designed for professional installers and facility managers requiring a tough, durable floor coating on properly prepared concrete substrates. Confirm chemistry, suitability, coverage, and system compatibility against the current Sherwin-Williams TDS, SDS, and project specification before use.

Professional note: Eco-HTS™ 100 requires thorough substrate preparation — concrete must be mechanically profiled, clean, dry, and free of laitance, oil, and curing compounds. Moisture testing is essential before application. Confirm suitability for your specific application and substrate against the current TDS before use.

Product Description

Eco-HTS™ 100 is a 100% solids, two-component floor coating that cures to a hard, seamless, high-build surface. Its high-tensile strength formulation is designed to resist cracking, impact, and abrasion under heavy foot and light vehicular traffic; confirm load ratings and traffic suitability against the current TDS. The solvent-free chemistry minimizes VOC emissions during application; confirm ventilation requirements against the SDS.

Once cured, Eco-HTS™ 100 provides a smooth, cleanable surface with resistance to a range of chemicals, oils, and cleaning agents; confirm chemical compatibility against the TDS and project specification before use. It can be used as a standalone floor coating or as a base coat in a multi-layer system incorporating decorative flake, quartz broadcast, or a polyurethane or polyaspartic topcoat; confirm system compatibility against the TDS before ordering.

Key Characteristics

  • High tensile strength — formulated to resist cracking, impact, and surface stress; confirm load ratings against the TDS.
  • 100% solids, solvent-free — low VOC; confirm ventilation requirements against the SDS.
  • Seamless, high-build finish — creates a continuous, cleanable floor surface; final appearance depends on substrate condition and application method.
  • Chemical resistance properties — formulated with resistance to common industrial chemicals, oils, and cleaning agents after cure; confirm chemical compatibility against the TDS and project specification.
  • Adhesion to concrete — designed for adhesion to mechanically prepared concrete substrates; final adhesion depends on substrate condition, surface profile (CSP), moisture content, and application method.
  • System versatile — compatible with decorative flake, quartz broadcast, and polyurethane or polyaspartic topcoats; confirm system compatibility against the TDS before ordering.

Typical Applications

  • Industrial and commercial concrete floor coatings
  • Warehouse and manufacturing facility floors
  • Garage and parkade floor base coats
  • Institutional facility floors
  • Base coat for decorative flake or quartz broadcast systems
  • Base coat under polyurethane or polyaspartic topcoat systems

Performance Highlights

Components
Two-component, 100% solids
VOC
Solvent-free / Low VOC
Finish
Seamless, high-build
Traffic
Foot and light vehicular — confirm against TDS
Application
Roller or squeegee
System Role
Base coat or standalone

Surface Preparation

Concrete must be mechanically profiled (shot-blasted or ground to the CSP specified in the TDS), clean, dry, and free of laitance, oil, grease, curing compounds, and incompatible coatings. Conduct moisture testing before application. Repair cracks and voids with a compatible repair mortar. Confirm primer requirements against the TDS before application.

Application Instructions

  1. Substrate preparation: Mechanically profile and clean the concrete as described above. Confirm moisture levels are within acceptable limits per the TDS.
  2. Mixing: Combine Part A and Part B at the ratio specified in the TDS. Mix thoroughly with a low-speed mixer for the full recommended time. Do not thin.
  3. Application: Pour mixed material onto the floor and spread evenly with a notched squeegee. Back-roll immediately with a phenolic-core roller to achieve uniform film build.
  4. Broadcast (if applicable): For flake or quartz systems, broadcast aggregate into the wet coating to refusal. Remove excess after cure.
  5. Topcoat (if applicable): Apply an approved polyurethane or polyaspartic topcoat within the recoat window specified in the TDS.

Limitations

  • Not UV stable — requires a UV-stable topcoat for exposed or sunlit areas; confirm against TDS.
  • Do not apply to damp, contaminated, or unsound concrete.
  • Do not apply below minimum temperature or when substrate temperature is within 3°C of the dew point; confirm temperature requirements against the TDS.
  • Not recommended for areas subject to continuous water immersion without system approval.
  • Pot life is temperature-dependent — work in manageable batches in warm conditions.

Health & Safety

Read the current Safety Data Sheet (SDS) before use. Wear gloves, eye protection, and ensure adequate ventilation during mixing and application. Refer to the SDS for full hazard classification and first-aid measures.

Purchasing Note: All sales are intended for professional and trade purchasers. Before ordering, confirm product suitability, quantity, colour, system compatibility, substrate condition, pickup timing and delivery requirements. Product use and installation are the responsibility of the purchaser and installer.

Technical information is provided for professional reference only. Product selection, substrate preparation, installation method, coverage, cure time, system compatibility and final performance remain the responsibility of the purchaser, installer, project specifier and/or manufacturer documentation. Always confirm suitability against the current TDS, SDS, project specification and site conditions before use.

Available at Canopus Supply — North Vancouver, BC.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 24746899628

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 1411 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
beth B
Louisville, US
★★★★★ 5
Good quality
Really pretty, will make a nice gift. Not too small or too big
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 12, 2026
C
Verified Purchase
Concerned citizen
Lexington, US
★★★★★ 5
Nice earrings
The earrings were pretty and light . Hoping they last forever.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 2, 2025
M
Verified Purchase
Mary Hagan
Dallas, US
★★★★★ 5
Rose gold heart earrings.
Style: 16mm Rose Gold
For my daughter and she loves them. They go with all her jewelry.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 6, 2025
P
Verified Purchase
Patricia DeGemmis
Phoenix, US
★★★★★ 4
You can wear them in the water because they are 14 k gold
Love these earrings. They were a little smaller than I thought and the clasp gets wonky after a while.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 27, 2025
C
Verified Purchase
Cheryl E
Whiting, US
★★★★★ 5
These have been a conversational piece
Style: 16mm Rose Gold
I thought these were cute. I purchased two sets because I have two holes. They seem like a good quality of rose gold. They are not to big but the heart just hugs my ears.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 11, 2023

recommand products