KanexPro VGA 1x2 Extender over CAT5e/6 with Audio up to 1,000ft (300m)

The KanexPro 1x2 VGA extender over CAT5e/6 is engineered to deliver dependable, high-quality video and stereo audio over substantial distances. This professional-grade kit enables you to route two high-resolution VGA signals and synchronized stereo audio from a single source to two remote displays across a CAT5e/6 cable, supporting installations in classrooms, corporate boardrooms, digital signage, and event spaces. Ideal for environments that demand flexible placement and reliable performance, the system uses standard network cabling to minimize wiring complexity while preserving image clarity and color accuracy. With built-in management features like separate gain and peaking controls on each receiver, you gain precise control over image brightness and skew, ensuring consistent performance across multiple displays regardless of room size or layout. Whether you’re distributing content to two projectors in a large lecture hall or streaming a corporate presentation to two monitors in a showroom, this KanexPro extender is designed for easy deployment, sturdy operation, and long-distance transmission without sacrificing video fidelity.

• Extend two VGA video signals plus stereo audio up to 1,000 ft (300 m) over a single CAT5e/6 cable, simplifying installation and reducing wiring costs in multi-display environments.
• Each receiver features its own gain and peaking rotary switch, enabling on-site brightness tuning and skew compensation to maintain sharp, aligned images over long cable runs.
• Supports high-resolution VGA transmission to projectors, monitors, and displays with consistent color and detail, helping to deliver engaging presentations and clear instructional content.
• Designed for professional AV deployments with a compact transmitter and dual receivers that integrate cleanly into fixed racks or portable setups, making it suitable for classrooms, conference rooms, and digital signage.
• Perfect for environments requiring two displays from a single source—such as mirrored or complementary content across two screens—without latency or misalignment between outputs.

Technical Details of KanexPro VGA 1x2 Extender over CAT5e/6 with Audio up to 1,000ft (300m)

• Video distribution: 1x VGA input from the source to 2x VGA outputs on receivers, enabling two displays to show the same source content.
• Audio passthrough: Stereo audio carried alongside the VGA signals for complete multimedia presentation capabilities.
• Distance capability: Up to 1,000 ft (300 m) over CAT5e/6 cabling, suitable for large rooms, auditoriums, and multi-zone setups.
• Cable type: Standard CAT5e or CAT6 twisted-pair cable; compatible with existing networking infrastructure to minimize installation complexity.
• Receiver controls: Separate gain and peaking adjustments on each receiver to fine-tune brightness and timing (skew) for optimal image quality at remote locations.

How to Install KanexPro VGA 1x2 Extender over CAT5e/6 with Audio up to 1,000ft (300m)

Setting up the KanexPro VGA 1x2 Extender is designed to be straightforward, enabling you to deploy quickly in most professional environments. The process leverages common VGA and CAT5e/6 cabling, allowing you to integrate smoothly with standard AV equipment and room setups. Begin by planning the layout to determine the location of the transmitter and two receivers in relation to the source device and the displays. Consider power availability, cable routes, and potential interference sources to ensure clean signal transmission. Once you have a clear plan, follow these steps to complete a reliable installation that preserves image quality and audio synchronization across both displays:

• Connect the source device’s VGA output to the transmitter’s VGA input. Attach the stereo audio output from the source to the transmitter’s audio input (as provided by the kit). This establishes the single-point source that will be extended to both displays.
• Run a CAT5e or CAT6 cable from the transmitter to the location of the receivers. If you are distributing to two displays, you can use a single long run or separate branches depending on your room layout and cable routing capabilities.
• At each display location, connect a receiver to its respective display via VGA input. If available, connect the receiver’s audio output to external speakers or to the display’s audio input to ensure synchronized sound with the video.
• Power on the transmitter and both receivers. Allow the system to initialize and verify that both displays are receiving the same source content with minimal delay. If your displays support EDID, ensure consistent EDID settings to maintain compatible resolutions and aspect ratios across outputs.
• Use the separate gain and peaking rotary switches on each receiver to adjust brightness and skew for your particular installation. This step compensates for cable length, signal degradation, or layout-specific timing differences to ensure clean, aligned images on both screens.

Pro tips for optimal performance: keep CAT5e/6 cables away from high-power lines and sources of EMI; when possible, use shorter runs for the primary path and reserve longer lengths for the secondary connections. Maintain clean cable management to minimize physical interference and ensure that the rotary controls on the receivers are easily accessible for adjustment during calibration. The KanexPro extender is designed to integrate with standard AV workflows, enabling straightforward deployment alongside projectors, displays, switches, and distribution equipment. This makes it an excellent fit for training rooms, lecture halls, retail environments with dual displays, and corporate spaces where consistent presentation quality is essential across multiple viewing points.

Frequently asked questions

• What is the maximum distance for this VGA extender? The system supports remote distances up to 1,000 ft (300 m) when using CAT5e/6 cabling.
• How many displays can be driven from one source? The KanexPro 1x2 extender enables two displays to receive the same source content from a single VGA input, making it ideal for mirrored or complementary display setups.
• Does it carry audio? Yes. The extender includes stereo audio transmission alongside the VGA video signals for a complete multimedia experience at each display.
• What cabling is required? Standard CAT5e or CAT6 twisted-pair cable is used to transport the VGA and audio signals between the transmitter and receivers.
• Are brightness and skew adjustments necessary? On each receiver, there are independent gain and peaking controls, allowing on-site tuning of brightness and skew to optimize image quality for long cable runs and different display locations.