Embellish Bold Tearaway 12" x 10 yds

Embellish Bold Tearaway 12" x 10 ydsEmbellish Bold Tearaway 12" x 10 yds Embellish Bold Tearaway 12" x 10 yds Embellish Bold Tearaway is a tightly woven, heavy duty, stabilizer made using a unique Non Woven technique, and it is used to support large or dense embroideries on stable woven fabric such as: cotton, duck cloth, twill, and denim. It features a multi directional tear capability, easily pulling away clean from the embroidery design for a crisp look on the front and back. It is

Embellish Bold Tearaway 12" x 10 yds

Embellish Bold Tearaway 12" x 10 yds

Embellish® Bold Tearaway is a tightly woven, heavy duty, stabilizer made using a unique “Non-Woven” technique, and it is used to support large or dense embroideries on stable woven fabric such as: cotton, duck cloth, twill, and denim. It features a multi-directional tear capability, easily pulling away clean from the embroidery design for a crisp look on the front and back. It is also available in a fusible version. Embellish® Bold Tearaway is recommended to be used as a “floater” under the hoop when used in conjunction with Embellish® Fusible Bold Tearaway that has been ironed to the back of woven fabric. Adding a “floater” of Embellish® Bold Tearaway adds additional support to the fabric when using a design that has more than 12,000 stitches in a 4”x4” hoop.

EBT-12 (12”x10 yds)  |  EBT-15 (15”x10 yds)  |  EBT-20 (20”x10 yds)

Embellish® Bold Tearaway is a tightly woven, heavy duty, stabilizer made using a unique “Non-Woven” technique, and it is used to support large or dense embroideries on stable woven fabric such as: cotton, duck cloth, twill, and denim. It features a multi-directional tear capability, easily pulling away clean from the embroidery design for a crisp look on the front and back. It is also available in a fusible version. Embellish® Bold Tearaway is recommended to be used as a “floater” under the hoop when used in conjunction with Embellish® Fusible Bold Tearaway that has been ironed to the back of woven fabric. Adding a “floater” of Embellish® Bold Tearaway adds additional support to the fabric when using a design that has more than 12,000 stitches in a 4”x4” hoop.

Contents:

Made in America. Premium tearaway fibers using the Wet-Laid Non-Woven Process. 2 oz.

Stitch Count:

Holds up to 12,000 embroidery stitches in a 4”x4”

To Use:

• Cut a “floater” piece at least one inch larger than the outer perimeter of the embroidery design to ensure proper stabilization.
  
• Hoop the material along with the fused Embellish® Fusible Bold Tearaway, making sure the material and stabilizer are taut.
  
• If the design has more than 12,000 stitches in a 4” x 4” hoop then “float” a piece of non-fusible Embellish® Bold Tearaway under the hoop for added support.
  
• Add an embroidery topper on top of the hooped material (either Embellish® Rinse-Away Clear Topper or Embellish® Iron-Away Clear Topper).
  
• Embroider the design.
  

To Remove:

• Remove the material from the hoop. Remove the topper following the topper product sheet found in this workbook.
  
• Hold your fingers over the bobbin thread and tear away as much of the stabilizer as possible, starting with the “floater.”
  
• If the iron temperature was too hot during the fusing process of the Embellish® Fusible Bold Tearaway, it might be necessary to re-heat the stabilizer using a Silk Setting for it to release from the material.

Launder and dry the item according to the fabric material fiber content.